Tips | Miramesa Basketball

Diamond Cut Laser

September 26th, 2011 admin No comments

Diamond Cut Laser

Quadrant Glazing Bead, Diamond Cutting Blade And Closed Tread Softwood Stairs Are All Part Of Jas Timbers February Special

QUADRANT Glazing Bead, Diamond Cutting Blade and closed tread softwood stairs all part of Jas Timbers February special. Jas Timber (Timber merchants Lancashire) are offering a reduction on a number of products including closed tread softwood stairs and quadrant glazing bead.

QUADRANT Glazing Bead - Softwood Pine

3/8" QUADRANT (9x9mm) - Richard Burbidge
1/2" QUADRANT (12x12mm) - Richard Burbidge
5/8" QUADRANT (15x15mm) - Richard Burbidge
3/4" QUADRANT (18x18mm) - Richard Burbidge
7/8" QUADRANT (21x21mm) - Richard Burbidge

3/8" QUADRANT (9x9mm) - TM670 Pine - Cheshire Mouldings
1/2" QUADRANT (12x12mm) - TM671 Pine - Cheshire Mouldings
5/8" QUADRANT (15x15mm) - TM672 Pine - Cheshire Mouldings
3/4" QUADRANT (18x18mm) - TM673 Pine - Cheshire Mouldings
7/8" QUADRANT (21x21mm) - TM674 Pine - Cheshire Mouldings

CLOSED TREAD SOFTWOOD Stairs : Made to size Domestic Staircases

We make staircases in our own workshop, and can manufacture to your measurements;
Options available include newel-posts, bull-nose steps and kite-winders, if required.
They can be made in a choice of timbers including Sapele-hardwood and Oak.
Treads can be made from MDF if required, and risers can be made from plywood.

Domestic Specification to Building Regulations: Max. 220mm rise with 42degree pitch.
Maximum width up to 915mm for the prices shown; poa for wider staircases.
ex 9x1.5 PSE Scandinavian Redwood Strings;
ex 11x1 PSE Whitewood Treads, 15mm Nosing and grooved for Risers;
ex 9x1 PSE Whitewood Risers.
Strings are trenched, sanded, glued for Treads and Risers, then clamped, wedged and blocked, for minimum movement in the finished Staircase. All treads, risers, wedges and blocks are glued with an exterior-grade PVA Adhesive.

Diamond Cutting Blade for Stone & Concrete
- Dronco Brand - Made in Germany

(must be used to manufacturer's instructions.)

wide range of application
outstanding lifetime
laser welded

Good cutting performance on both hard and abrasive materials combined with a long service life. This disc also cuts reinforcements. No cooling intervals necessary.

Field of Application:
Basalt, concrete, metal, cotto plates, cast pipes, gneiss, granite, clinker, porphyr, etc.

115mm, 230mm and 300mm available

About the Author

Martin Roche

http://www.jastimber.co.uk

Jas Timber (Timber Merchants Lancashire)

Stained Glass: How to Cut Stained Glass with the Diamond Laser 5000 Band Saw